123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990 |
- <?xml version='1.0' encoding='UTF-8'?>
- <module fritzingVersion='0.5.2b.02.18.4756' moduleId='SHT1x-Breakout'>
- <version>4</version>
- <date>2015-10-04</date>
- <author>f.althaus</author>
- <description>The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens® technology integrates two sensors and readout circuitry on one single chip. All you need is two lines for 2-wire communication, and you’ll have relative humidity and temperature readings to help you sense the world around you!
- The two sensors built into the SHT15 have been seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit resulting in superior signal quality, fast response time, and a strong resistance to external disturbances. Additionally, the on board SHT15 features a 0-100% RH measurement range with a temperature accuracy of +/- 0.3°C @ 25°C. There are only four pins that need to be hooked up in order to start using this sensor in a project. One for VCC, one for GND, and the two data lines SDA and SCL.</description>
- <title>SHT1x-Breakout</title>
- <url>https://www.sparkfun.com/products/13683</url>
- <tags>
- <tag>Breakout</tag>
- <tag>SHT1x</tag>
- <tag>SHT1</tag>
- <tag>Sparkfun</tag>
- </tags>
- <properties>
- <property name='version'>v14</property>
- <property name='family'>Sparkfun Breakout</property>
- <property name='variant'>SHT15</property>
- </properties>
- <views>
- <breadboardView>
- <layers image='breadboard/SHT1x-Breakout_breadboard.svg'>
- <layer layerId='breadboard'/>
- </layers>
- </breadboardView>
- <schematicView>
- <layers image='schematic/SHT1x-Breakout_schematic.svg'>
- <layer layerId='schematic'/>
- </layers>
- </schematicView>
- <pcbView>
- <layers image='pcb/SHT1x-Breakout_pcb.svg'>
- <layer layerId='copper1'/>
- <layer layerId='silkscreen'/>
- <layer layerId='copper0'/>
- </layers>
- </pcbView>
- <iconView>
- <layers image='breadboard/SHT1x-Breakout_breadboard.svg'>
- <layer layerId='icon'/>
- </layers>
- </iconView>
- </views>
- <connectors>
- <connector id='connector4' type='female' name='SCK'>
- <description>SCK</description><views>
- <breadboardView>
- <p layer='breadboard' svgId='connector4pin'/></breadboardView>
- <schematicView>
- <p layer='schematic' svgId='connector4pin' terminalId='connector4terminal'/></schematicView>
- <pcbView>
- <p layer='copper0' svgId='connector4pad'/><p layer='copper1' svgId='connector4pad'/></pcbView>
- </views>
- </connector>
- <connector id='connector5' type='female' name='DATA'>
- <description>DATA</description><views>
- <breadboardView>
- <p layer='breadboard' svgId='connector5pin'/></breadboardView>
- <schematicView>
- <p layer='schematic' svgId='connector5pin' terminalId='connector5terminal'/></schematicView>
- <pcbView>
- <p layer='copper0' svgId='connector5pad'/><p layer='copper1' svgId='connector5pad'/></pcbView>
- </views>
- </connector>
- <connector id='connector6' type='female' name='VCC'>
- <description>VCC</description><views>
- <breadboardView>
- <p layer='breadboard' svgId='connector6pin'/></breadboardView>
- <schematicView>
- <p layer='schematic' svgId='connector6pin' terminalId='connector6terminal'/></schematicView>
- <pcbView>
- <p layer='copper0' svgId='connector6pad'/><p layer='copper1' svgId='connector6pad'/></pcbView>
- </views>
- </connector>
- <connector id='connector7' type='female' name='GND'>
- <description>GND</description><views>
- <breadboardView>
- <p layer='breadboard' svgId='connector7pin'/></breadboardView>
- <schematicView>
- <p layer='schematic' svgId='connector7pin' terminalId='connector7terminal'/></schematicView>
- <pcbView>
- <p layer='copper0' svgId='connector7pad'/><p layer='copper1' svgId='connector7pad'/></pcbView>
- </views>
- </connector>
- </connectors>
- <buses>
- </buses>
- </module>
|