Arduino Mega ADK (Rev3)

4 Mi Apr 3 2013 althaus The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. The ADK is based on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter. Revision 2 of the MegaADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. Revision 3 of the board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit. For information on using the board with the Android OS, see Google's ADK documentation. Arduino Mega ADK (Rev3) http://arduino.cc/en/Main/ArduinoBoardADK arduino adk mega ATmega 2560 /obsolete/microcontroller board (arduino) Arduino MEGA ADK (Rev3) A8

A10

A11

A12

A13

A14

A15

D21/SCL

D20/SDA

D19/RX1

D18/TX1

D17/RX2

D16/TX2

D15/RX3

D14/TX3

ICSP2 MISO

ICSP2 SCK

ICSP2 MOSI

RESET2

GND

AREF

GND

D13 PWM

D12 PWM

D11 PWM

D10 PWM

D9 PWM

D8 PWM

IOREF

RESET

3V3

GND

VIN

D0/RX0

D1/TX0

D2 PWM

D3 PWM

D4 PWM

D5 PWM

D6 PWM

D7 PWM

D22

D23

D24

D25

D26

D27

D28

D29

D30

D31

D32

D33

D34

D35

D36

D37

D38

D39

D40

D41

D42

D43

D44

D45

D46

D47

D48

D49

D50/MISO

D51/MOSI

D52/SCK

D53/SS

GND