4
2013-04-03
althaus
It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.
Arduino Pro Mini v13
https://www.sparkfun.com/products/11113
arduino
pro mini v13
ATmega168
/obsolete/microcontroller board (arduino)
Arduino Pro Mini (Rev13)
DTR
D0/TX
D1/RX
VCC
GND
GND
A4
A5
RAW
GND
RESET
VCC
A3
A2
A1
A0
D13/SCK
D12/MISO
D11 PWM/MOSI
D10 PWM/SS
D9 PWM
D8
D7
D6 PWM
D5 PWM
D4
D3 PWM
D2
GND
RESET
D1/RX
D0/TX